High-Performance Epoxy Casting & Metal Repair Adhesive
✅ Impact Resistant
✅ Waterproof & Oilproof
✅ High-Temperature Resistance (Up to 200°C)
✅ Shore D 85-90 (High Hardness, Wear-Resistant)
✅ Excellent Dielectric Strength (High Electrical Insulation)
Net: 50ml / 1.69oz
� Usage Instructions
� Surface Preparation: Roughen the repair area and ensure it is clean, dry, and free of oil,
rust, and dust.
� Mixing: Mix S300A and S300B at a 1:1 ratio (by weight or volume) and stir thoroughly
until fully blended.
� Application: Apply the mixed adhesive evenly to the repair area and press firmly.
� Curing:
• At 25°C: Initial cure in 3-4 hours, full cure in 8-12 hours before performance testing.
• At 60°C: Accelerated cure in 2 hours.
� Application
"Repair Beyond Limits."
S300 is a two-component, room-temperature curing epoxy adhesive, designed for repairing
casting defects such as porosity, sand holes, and pitting in cast iron, steel, and aluminum. It
also excels in waterproof sealing and structural bonding.
� Storage
� Store in a cool, dry place. Keep away from children.
� Keep tightly sealed after use to maintain effectiveness.
� Shelf life: 18 months.
Read lessQuantity:
In Stock
Sold out
High-Performance Epoxy Casting & Metal Repair Adhesive
Ingredients
Formulated for Performance. Trusted by Professionals. – Aerospace-grade, high-strength base– Precision-curing for thermal and mechanical durability– Improves bonding strength, gap-filling & wear resistance – Enhances waterproofing and chemical resistance– Improve flow, workability, and surface adhesion
✅ Solvent-free
✅ Non-flammable
✅ RoHS & MSDS CertifiedAOJEL S300 contains no volatile organic compounds (VOCs), making it safe for industrial and indoor use.
Product details
Two-Component, Room-Temperature Cure
1:1 (by weight or volume)
Silver (A) + Beige (B)
50ml (1.69oz)
30 minutes
3-4 hours at 25°C
8–12 hours
18 months (sealed)
Keep sealed in a cool, dry place
About ASHWAGANDHA++
"Repair. Restore. Reunite."
AOJEL™ S300 is a high-performance epoxy adhesive designed for critical metal repairs. Formulated in New York and manufactured to international standards, it is trusted by professionals in:
What makes AOJEL S300 different?
✅ Drillable, Fileable, Threadable after cure
✅ High Heat Resistance (Up to 200°C)
✅ Shore D Hardness 85-90
✅ Dielectric Strength – Ideal for electrical insulation
✅ Permanent Bonds – No shrinkage, cracking, or softening
Whether you’re patching a radiator, sealing a crack, or restoring vintage equipment — AOJEL helps you fix what matters.
Shipping services
We will ship the orders approximately 40 days after reaching 10000 units. If there is any delay in timing, we will notify you promptly via email. Everything is to ensure that the freshest ingredients are delivered to you.
